https://www.scsi2sd.com/api.php?action=feedcontributions&user=Aperez&feedformat=atomSCSI2SD.COM - User contributions [en]2024-03-28T15:55:12ZUser contributionsMediaWiki 1.35.1https://www.scsi2sd.com/index.php?title=SCSI2SD&diff=119SCSI2SD2022-10-08T15:02:34Z<p>Aperez: </p>
<hr />
<div><strong>1 September 2022</strong> - Due to ongoing global semiconductor component shortages, we're unable to produce more SCSI2SD V5 and V6 boards at this time. As a result of these shortages, Rabbit Hole Computing has developed an alternative SCSI emulation product, [https://zuluscsi.com ZuluSCSI]. Check out ZuluSCSI instead. It's SCSI command handling code is inherited from SCSI2SD V6, and it performs significantly better than SCSI2SD V5 in nearly all benchmarks. ZuluSCSI is a great alternative to SCSI2SD, and available for purchase today from [https://store.rabbitholecomputing.com/ProductDetails.asp?ProductCode=ZuluSCSI-V1.1-REV-2022C Rabbit Hole Computing]<br />
<br />
<br />
<br />
The latest SCSI2SD firmware and configuration utilities can be found at [http://docs.scsi2sd.com http://docs.scsi2sd.com]<br />
<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=118SCSI2SD2022-09-12T01:36:35Z<p>Aperez: </p>
<hr />
<div><strong>1 September 2022</strong> - Due to ongoing global semiconductor component shortages, we're unable to produce more SCSI2SD V5 and V6 boards at this time. As a result of these shortages, Rabbit Hole Computing has developed an alternative SCSI emulation product, [https://zuluscsi.com ZuluSCSI]. Check out ZuluSCSI instead. It's SCSI command handling code is inherited from SCSI2SD V6, and it performs significantly better than SCSI2SD V5 in nearly all benchmarks. ZuluSCSI is a great alternative to SCSI2SD, and available for purchase today from [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=ZuluSCSI-V1.1-REV-2022C Rabbit Hole Computing]<br />
<br />
<br />
<br />
The latest SCSI2SD firmware and configuration utilities can be found at [http://docs.scsi2sd.com http://docs.scsi2sd.com]<br />
<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=117SCSI2SD2022-09-12T01:36:22Z<p>Aperez: </p>
<hr />
<div><strong>1 September 2022</strong> - Due to ongoing global semiconductor component shortages, we're unable to produce more SCSI2SD V5 and V6 boards at this time. As a result of these shortages, Rabbit Hole Computing has developed an alternative SCSI emulation product, [https://zuluscsi.com ZuluSCSI]. Check out ZuluSCSI instead. It's SCSI command handling code is inherited from SCSI2SD V6, and it performs significantly better than SCSI2SD V5 in nearly all benchmarks. ZuluSCSI is a great alternative to SCSI2SD, and available for purchase today from [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=ZuluSCSI-V1.1-REV-2022C Rabbit Hole Computing]<br />
<p><br />
The latest SCSI2SD firmware and configuration utilities can be found at [http://docs.scsi2sd.com http://docs.scsi2sd.com]<br />
<p><br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=116SCSI2SD2022-09-12T01:36:10Z<p>Aperez: </p>
<hr />
<div><strong>1 September 2022</strong> - Due to ongoing global semiconductor component shortages, we're unable to produce more SCSI2SD V5 and V6 boards at this time. As a result of these shortages, Rabbit Hole Computing has developed an alternative SCSI emulation product, [https://zuluscsi.com ZuluSCSI]. Check out ZuluSCSI instead. It's SCSI command handling code is inherited from SCSI2SD V6, and it performs significantly better than SCSI2SD V5 in nearly all benchmarks. ZuluSCSI is a great alternative to SCSI2SD, and available for purchase today from [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=ZuluSCSI-V1.1-REV-2022C Rabbit Hole Computing]<br />
<br />
The latest SCSI2SD firmware and configuration utilities can be found at [http://docs.scsi2sd.com http://docs.scsi2sd.com]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=115SCSI2SD2022-09-12T01:35:38Z<p>Aperez: </p>
<hr />
<div><strong>1 September 2022</strong> - Due to ongoing global semiconductor component shortages, we're unable to produce more SCSI2SD V5 and V6 boards at this time. As a result of these shortages, Rabbit Hole Computing has developed an alternative SCSI emulation product, [https://zuluscsi.com ZuluSCSI]. Check out ZuluSCSI instead. It's SCSI command handling code is inherited from SCSI2SD V6, and it performs significantly better than SCSI2SD V5 in nearly all benchmarks. ZuluSCSI is a great alternative to SCSI2SD, and available for purchase today from [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=ZuluSCSI-V1.1-REV-2022C Rabbit Hole Computing]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5.5/V5.1 firmware and configuration utilities can be found at [http://docs.scsi2sd.com http://docs.scsi2sd.com]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=114SCSI2SD2022-09-12T01:34:41Z<p>Aperez: </p>
<hr />
<div><strong>1 September 2022</strong> - Due to ongoing global semiconductor component shortages, we're unable to produce more SCSI2SD V5 and V6 boards at this time. As a result of these shortages, Rabbit Hole Computing has developed an alternative SCSI emulation product, [https://zuluscsi.com ZuluSCSI]. Check out ZuluSCSI instead. It's SCSI command handling code is inherited from SCSI2SD V6, and it performs significantly better than SCSI2SD V5 in nearly all benchmarks. ZuluSCSI is a great alternative to SCSI2SD, and available for purchase today from [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=ZuluSCSI-V1.1-REV-2022C Rabbit Hole Computing]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5.5/V5.1 firmware and configuration utilities can be found at <a href="http://docs.scsi2sd.com">http://docs.scsi2sd.com</a></div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=113SCSI2SD2022-09-02T00:16:15Z<p>Aperez: </p>
<hr />
<div><strong>1 September 2022</strong> - Due to ongoing global semiconductor component shortages, we're unable to produce more SCSI2SD V5 and V6 boards at this time. As a result of these shortages, Rabbit Hole Computing has developed an alternative SCSI emulation product, [https://zuluscsi.com ZuluSCSI]. Check out ZuluSCSI instead. It's SCSI command handling code is inherited from SCSI2SD V6, and it performs significantly better than SCSI2SD V5 in nearly all benchmarks. ZuluSCSI is a great alternative to SCSI2SD, and available for purchase today from [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=ZuluSCSI-V1.1-REV-2022C Rabbit Hole Computing]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5.5/V5.1 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=112SCSI2SD2022-09-02T00:14:11Z<p>Aperez: </p>
<hr />
<div><strong>1 September 2022</strong> - Rabbit Hole Computing has developed an alternative SCSI emulation product, [https://zuluscsi.com ZuluSCSI]. Due to the ongoing global semiconductor component shortages, we're unable to produce more SCSI2SD V5 and V6 boards at this time. Check out ZuluSCSI instead. It's SCSI command handling code is inherited from SCSI2SD V6, and it performs significantly better than SCSI2SD V5 in nearly all benchmarks. ZuluSCSI is a great alternative to SCSI2SD, and available for purchase today from [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=ZuluSCSI-V1.1-REV-2022C Rabbit Hole Computing]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5.5/V5.1 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=111SCSI2SD2022-09-02T00:13:51Z<p>Aperez: </p>
<hr />
<div><strong>1 September 2022</strong> - Rabbit Hole Computing has developed an alternative SCSI emulation product, [https://zuluscsi.com ZuluSCSI]. Due to the ongoing global semiconductor component shortages, we're unable to produce more SCSI2SD V5 and V6 boards at this time. Check out ZuluSCSI instead. It's SCSI command handling code is inherited from SCSI2SD V6, and it performs significantly better than SCSI2SD V5 in nearly all benchmarks. ZuluSCSI is a great alternative to SCSI2SD, and available for purchase today from [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=ZuluSCSI-V1.1-REV-2022C Rabbit Hole Computing]<br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
Australian Customers, we have a distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5.5/V5.1 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=110SCSI2SD2022-09-02T00:13:30Z<p>Aperez: </p>
<hr />
<div><strong>1 September 2022</strong> - Rabbit Hole Computing has developed an alternative SCSI emulation product, [https://zuluscsi.com ZuluSCSI]. Due to the ongoing global semiconductor component shortages, we're unable to produce more SCSI2SD V5 and V6 boards at this time. Check out ZuluSCSI instead. It's SCSI command handling code is inherited from SCSI2SD V6, and it performs significantly better than SCSI2SD V5 in nearly all benchmarks. ZuluSCSI is a great alternative to SCSI2SD, and available for purchase today from Rabbit Hole Computing: [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=ZuluSCSI-V1.1-REV-2022C ZuluSCSI V1.1]<br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
Australian Customers, we have a distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5.5/V5.1 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=109SCSI2SD2022-09-02T00:06:59Z<p>Aperez: </p>
<hr />
<div><strong>1 September 2022</strong> - Rabbit Hole Computing has developed an alternative SCSI emulation product, [https://zuluscsi.com ZuluSCSI]. Due to the ongoing global semiconductor component shortages, we're unable to produce more SCSI2SD V5 and V6 boards at this time. Check out ZuluSCSI instead. It's SCSI command handling code is inherited from SCSI2SD V6, and it performs significantly better than SCSI2SD V5 in nearly all benchmarks. ZuluSCSI is a great alternative to SCSI2SD, and available for purchase today from Rabbit Hole Computing [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=ZuluSCSI-V1.1-REV-2022C]<br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
Australian Customers, we have a distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5.5/V5.1 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=108SCSI2SD2022-04-08T21:02:24Z<p>Aperez: </p>
<hr />
<div><strong>1 April 2022</strong> - SCSI2SD V5.2 stock has been depleted. We are sold out of V5.2's, but we still have plenty of stock of [https://store.inertialcomputing.com/product-p/scsi2sd-v5.0c-rev2021d-noberg.htm SCSI2SD V5.0c] and [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 SCSI2SD V5.5's]<br />
<br />
<strong>3 March 2022</strong> - SCSI2SD V5.5 [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
Australian Customers, we have a distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5.5/V5.1 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=107SCSI2SD2022-04-07T20:01:33Z<p>Aperez: </p>
<hr />
<div><strong>3 March 2022</strong> - SCSI2SD V5.5 [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
<strong>1 March 2022</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5.5/V5.1 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=106SCSI2SD2022-03-02T22:43:25Z<p>Aperez: </p>
<hr />
<div><strong>3 March 2022</strong> - SCSI2SD V5.5 [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
<strong>1 March 2022</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=105SCSI2SD2022-03-02T22:42:03Z<p>Aperez: </p>
<hr />
<div><strong>3 March 2022</strong> - SCSI2SD V5.5 [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
<br />
<strong>23 July 2021</strong> - SCSI2SD V6 [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V6-Rev2021 available for purchase today].<br><br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [https://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=104SCSI2SD2021-07-23T18:43:17Z<p>Aperez: </p>
<hr />
<div><strong>23 July 2021</strong> - SCSI2SD V6 [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V6-Rev2021 available for purchase today].<br><br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [https://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=103SCSI2SD2021-04-23T00:45:28Z<p>Aperez: </p>
<hr />
<div><strong>17 April 2021</strong> - SCSI2SD V6 inventory replenishment is on the way, and expected to arrive by the 24th. <br> We still have plenty of SCSI2SD V5.2's and V5.5's<br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [https://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD_V6&diff=102SCSI2SD V62021-04-23T00:21:51Z<p>Aperez: </p>
<hr />
<div><h2>Welcome to the SCSI2SD V6 support page</h2><br />
<br />
<br />
[[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left]]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD_V6&diff=101SCSI2SD V62021-04-23T00:21:41Z<p>Aperez: </p>
<hr />
<div><h2>Welcome to the SCSI2SD V6 support page</h2><br />
<br />
<br />
[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD_V6&diff=100SCSI2SD V62021-04-23T00:21:23Z<p>Aperez: </p>
<hr />
<div><h2>Welcome to the SCSI2SD V6 support page</h2><br />
<br />
<br />
[[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD_V6&diff=99SCSI2SD V62021-04-23T00:21:04Z<p>Aperez: </p>
<hr />
<div><h1>Welcome to the SCSI2SD V6 support page<h1><br />
<br />
<br />
[[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD_V6&diff=98SCSI2SD V62021-04-23T00:19:50Z<p>Aperez: Created page with "! SCSI2SD V6 Welcome to the SCSI2SD V6 support page"</p>
<hr />
<div>! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
<br />
Welcome to the SCSI2SD V6 support page</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=97SCSI2SD2021-04-22T23:51:21Z<p>Aperez: </p>
<hr />
<div><strong>17 April 2021</strong> - SCSI2SD V6 inventory replenishment is on the way, and expected to arrive by the 20th. <br> We still have plenty of SCSI2SD V5.2's and V5.5's<br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [https://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=96SCSI2SD2021-04-22T23:51:02Z<p>Aperez: </p>
<hr />
<div><strong>17 April 2021</strong> - SCSI2SD V6 inventory replenishment is on the way, and expected to arrive by the 20th. <br> We still have plenty of SCSI2SD V5.2's and V5.5's<br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [https://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=95SCSI2SD2021-04-17T16:17:14Z<p>Aperez: </p>
<hr />
<div><strong>17 April 2021</strong> - SCSI2SD V6 inventory replenishment is on the way, and expected to arrive by the 20th. <br> We still have plenty of SCSI2SD V5.2's and V5.5's<br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=94SCSI2SD2021-04-17T16:16:51Z<p>Aperez: </p>
<hr />
<div><strong>17 April 2021</strong> - SCSI2SD V6 inventory replenishment is on the way, and expected to arrive by the 20th. <br><br />
In the meantime, we still have plenty of SCSI2SD V5.2's and V5.5's<br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=93SCSI2SD2021-04-17T16:16:37Z<p>Aperez: </p>
<hr />
<div><strong>17 April 2021</strong> - SCSI2SD V6 inventory replenishment is on the way, and expected to arrive by the 20th. In the meantime, we still have plenty of SCSI2SD V5.2's and V5.5's<br />
<br />
<strong>29 January 2021</strong> - We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=92SCSI2SD2021-04-17T16:16:21Z<p>Aperez: </p>
<hr />
<div><strong>17 April 2021</strong>SCSI2SD V6 inventory replenishment is on the way, and expected to arrive by the 20th. In the meantime, we still have plenty of SCSI2SD V5.2's and V5.5's<br />
<br />
<strong>29 January 2021</strong>We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=91SCSI2SD2021-04-05T16:02:54Z<p>Aperez: </p>
<hr />
<div><strong> 04 April 2021</strong>Inventory of SCSI2SD V6 is temporarily depleted. More have already been assembled, and should arrive within a week. Stay tuned. In the meantime, we still have plenty of SCSI2SD V5.2's and V5.5's<br />
<br />
<strong> 29 January 2021</strong>We now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=90SCSI2SD2021-04-05T03:15:29Z<p>Aperez: </p>
<hr />
<div><strong> 29 January 2021</strong> Attention Canadian Customers - we now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=89SCSI2SD2021-02-28T16:52:26Z<p>Aperez: </p>
<hr />
<div><strong> 29 January 2021</strong> Attention Canadian Customers - we now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 and V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="http://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=88SCSI2SD2021-01-29T17:07:23Z<p>Aperez: </p>
<hr />
<div><strong> 29 January 2021</strong> Attention Canadian Customers - we now have a Canadian distributor, who stocks [https://decromancer.ooo/scsi2sd/ SCSI2SD V5.2 and V5.5.]<br />
<br />
<strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 a nd V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="http://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD-util-privacy-policy&diff=87SCSI2SD-util-privacy-policy2020-12-11T17:45:55Z<p>Aperez: </p>
<hr />
<div>== App Privacy Policy ==<br />
<br />
Last updated December 10th, 2020<br />
<br />
Rabbit Hole Computing LLC (“we” or “us” or “our”) respects the privacy of our users (“user” or “you”). This Privacy Policy explains how we collect, use, disclose, and safeguard your information when you visit our mobile application (the “Application”). Please read this Privacy Policy carefully. IF YOU DO NOT AGREE WITH THE TERMS OF THIS PRIVACY POLICY, PLEASE DO NOT ACCESS THE APPLICATION.<br />
<br />
We reserve the right to make changes to this Privacy Policy at any time and for any reason. We will alert you about any changes by updating the “Last updated” date of this Privacy Policy. You are encouraged to periodically review this Privacy Policy to stay informed of updates. You will be deemed to have been made aware of, will be subject to, and will be deemed to have accepted the changes in any revised Privacy Policy by your continued use of the Application after the date such revised Privacy Policy is posted.<br />
<br />
This Privacy Policy does not apply to the third-party online/mobile store from which you install the Application or make payments, including any in-game virtual items, which may also collect and use data about you. We are not responsible for any of the data collected by any such third party.<br />
<br />
This Privacy Policy was created using Termly’s Privacy Policy Generator.<br />
<br />
COLLECTION OF YOUR INFORMATION<br />
<br />
We may collect information about you in a variety of ways. The information we may collect via the Application depends on the content and materials you use, and includes:<br />
<br />
Derivative Data<br />
<br />
Information our servers automatically collect when you access the Application, such as your native actions that are integral to the Application, including liking, re-blogging, or replying to a post, as well as other interactions with the Application and other users via server log files.<br />
<br />
USE OF YOUR INFORMATION<br />
<br />
Having accurate information about you permits us to provide you with a smooth, efficient, and customized experience. Specifically, we may use information collected about you via the Application to: [Choose from the options below, or add your own]<br />
<br />
Administer sweepstakes, promotions, and contests.<br />
Assist law enforcement and respond to subpoena.<br />
Compile anonymous statistical data and analysis for use internally or with third parties.<br />
Create and manage your account.<br />
Deliver targeted advertising, coupons, newsletters, and other information regarding promotions and the Application to you.<br />
Email you regarding your account or order.<br />
Enable user-to-user communications.<br />
Fulfill and manage purchases, orders, payments, and other transactions related to the Application.<br />
Generate a personal profile about you to make future visits to the Application more personalized.<br />
Increase the efficiency and operation of the Application.<br />
Monitor and analyze usage and trends to improve your experience with the Application.<br />
Notify you of updates to the Application.<br />
Offer new products, services, mobile applications, and/or recommendations to you.<br />
Perform other business activities as needed.<br />
Prevent fraudulent transactions, monitor against theft, and protect against criminal activity.<br />
Process payments and refunds.<br />
Request feedback and contact you about your use of the Application.<br />
Resolve disputes and troubleshoot problems.<br />
Respond to product and customer service requests.<br />
Send you a newsletter.<br />
Solicit support for the Application.<br />
[Other]<br />
DISCLOSURE OF YOUR INFORMATION<br />
<br />
We may share information we have collected about you in certain situations. Your information may be disclosed as follows:<br />
<br />
By Law or to Protect Rights<br />
<br />
If we believe the release of information about you is necessary to respond to legal process, to investigate or remedy potential violations of our policies, or to protect the rights, property, and safety of others, we may share your information as permitted or required by any applicable law, rule, or regulation. This includes exchanging information with other entities for fraud protection and credit risk reduction.<br />
<br />
<br />
Interactions with Other Users<br />
<br />
If you interact with other users of the Application, those users may see your name, profile photo, and descriptions of your activity, including sending invitations to other users, chatting with other users, liking posts, following blogs.<br />
<br />
Online Postings<br />
<br />
When you post comments, contributions or other content to the Applications, your posts may be viewed by all users and may be publicly distributed outside the Application in perpetuity<br />
<br />
Sale or Bankruptcy<br />
<br />
If we reorganize or sell all or a portion of our assets, undergo a merger, or are acquired by another entity, we may transfer your information to the successor entity. If we go out of business or enter bankruptcy, your information would be an asset transferred or acquired by a third party. You acknowledge that such transfers may occur and that the transferee may decline honor commitments we made in this Privacy Policy.<br />
<br />
We are not responsible for the actions of third parties with whom you share personal or sensitive data, and we have no authority to manage or control third-party solicitations. If you no longer wish to receive correspondence, emails or other communications from third parties, you are responsible for contacting the third party directly.<br />
<br />
<br />
THIRD-PARTY WEBSITES<br />
<br />
The Application may contain links to third-party websites and applications of interest. Once you have used these links to leave the Application, any information you provide to these third parties is not covered by this Privacy Policy, and we cannot guarantee the safety and privacy of your information. Before visiting and providing any information to any third-party websites, you should inform yourself of the privacy policies and practices (if any) of the third party responsible for that website, and should take those steps necessary to, in your discretion, protect the privacy of your information. We are not responsible for the content or privacy and security practices and policies of any third parties, including other sites, services or applications that may be linked to or from the Application.<br />
<br />
SECURITY OF YOUR INFORMATION<br />
<br />
We use administrative, technical, and physical security measures to help protect your personal information. While we have taken reasonable steps to secure the personal information you provide to us, please be aware that despite our efforts, no security measures are perfect or impenetrable, and no method of data transmission can be guaranteed against any interception or other type of misuse. Any information disclosed online is vulnerable to interception and misuse by unauthorized parties. Therefore, we cannot guarantee complete security if you provide personal information.<br />
<br />
POLICY FOR CHILDREN<br />
<br />
We do not knowingly solicit information from or market to children under the age of 13. If you become aware of any data we have collected from children under age 13, please contact us using the contact information provided below.<br />
<br />
CALIFORNIA PRIVACY RIGHTS<br />
<br />
California Civil Code Section 1798.83, also known as the “Shine The Light” law, permits our users who are California residents to request and obtain from us, once a year and free of charge, information about categories of personal information (if any) we disclosed to third parties for direct marketing purposes and the names and addresses of all third parties with which we shared personal information in the immediately preceding calendar year. If you are a California resident and would like to make such a request, please submit your request in writing to us using the contact information provided below.<br />
<br />
If you are under 18 years of age, reside in California, and have a registered account with the Application, you have the right to request removal of unwanted data that you publicly post on the Application. To request removal of such data, please contact us using the contact information provided below, and include the email address associated with your account and a statement that you reside in California. We will make sure the data is not publicly displayed on the Application, but please be aware that the data may not be completely or comprehensively removed from our systems.</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD-util-privacy-policy&diff=86SCSI2SD-util-privacy-policy2020-12-11T04:29:09Z<p>Aperez: Initial privacy policy</p>
<hr />
<div>__App Privacy Policy__<br />
<br />
Last updated December 10th, 2020<br />
<br />
Rabbit Hole Computing LLC (“we” or “us” or “our”) respects the privacy of our users (“user” or “you”). This Privacy Policy explains how we collect, use, disclose, and safeguard your information when you visit our mobile application (the “Application”). Please read this Privacy Policy carefully. IF YOU DO NOT AGREE WITH THE TERMS OF THIS PRIVACY POLICY, PLEASE DO NOT ACCESS THE APPLICATION.<br />
<br />
We reserve the right to make changes to this Privacy Policy at any time and for any reason. We will alert you about any changes by updating the “Last updated” date of this Privacy Policy. You are encouraged to periodically review this Privacy Policy to stay informed of updates. You will be deemed to have been made aware of, will be subject to, and will be deemed to have accepted the changes in any revised Privacy Policy by your continued use of the Application after the date such revised Privacy Policy is posted.<br />
<br />
This Privacy Policy does not apply to the third-party online/mobile store from which you install the Application or make payments, including any in-game virtual items, which may also collect and use data about you. We are not responsible for any of the data collected by any such third party.<br />
<br />
This Privacy Policy was created using Termly’s Privacy Policy Generator.<br />
<br />
COLLECTION OF YOUR INFORMATION<br />
<br />
We may collect information about you in a variety of ways. The information we may collect via the Application depends on the content and materials you use, and includes:<br />
<br />
Derivative Data<br />
<br />
Information our servers automatically collect when you access the Application, such as your native actions that are integral to the Application, including liking, re-blogging, or replying to a post, as well as other interactions with the Application and other users via server log files.<br />
<br />
USE OF YOUR INFORMATION<br />
<br />
Having accurate information about you permits us to provide you with a smooth, efficient, and customized experience. Specifically, we may use information collected about you via the Application to: [Choose from the options below, or add your own]<br />
<br />
Administer sweepstakes, promotions, and contests.<br />
Assist law enforcement and respond to subpoena.<br />
Compile anonymous statistical data and analysis for use internally or with third parties.<br />
Create and manage your account.<br />
Deliver targeted advertising, coupons, newsletters, and other information regarding promotions and the Application to you.<br />
Email you regarding your account or order.<br />
Enable user-to-user communications.<br />
Fulfill and manage purchases, orders, payments, and other transactions related to the Application.<br />
Generate a personal profile about you to make future visits to the Application more personalized.<br />
Increase the efficiency and operation of the Application.<br />
Monitor and analyze usage and trends to improve your experience with the Application.<br />
Notify you of updates to the Application.<br />
Offer new products, services, mobile applications, and/or recommendations to you.<br />
Perform other business activities as needed.<br />
Prevent fraudulent transactions, monitor against theft, and protect against criminal activity.<br />
Process payments and refunds.<br />
Request feedback and contact you about your use of the Application.<br />
Resolve disputes and troubleshoot problems.<br />
Respond to product and customer service requests.<br />
Send you a newsletter.<br />
Solicit support for the Application.<br />
[Other]<br />
DISCLOSURE OF YOUR INFORMATION<br />
<br />
We may share information we have collected about you in certain situations. Your information may be disclosed as follows:<br />
<br />
By Law or to Protect Rights<br />
<br />
If we believe the release of information about you is necessary to respond to legal process, to investigate or remedy potential violations of our policies, or to protect the rights, property, and safety of others, we may share your information as permitted or required by any applicable law, rule, or regulation. This includes exchanging information with other entities for fraud protection and credit risk reduction.<br />
<br />
<br />
Interactions with Other Users<br />
<br />
If you interact with other users of the Application, those users may see your name, profile photo, and descriptions of your activity, including sending invitations to other users, chatting with other users, liking posts, following blogs.<br />
<br />
Online Postings<br />
<br />
When you post comments, contributions or other content to the Applications, your posts may be viewed by all users and may be publicly distributed outside the Application in perpetuity<br />
<br />
Sale or Bankruptcy<br />
<br />
If we reorganize or sell all or a portion of our assets, undergo a merger, or are acquired by another entity, we may transfer your information to the successor entity. If we go out of business or enter bankruptcy, your information would be an asset transferred or acquired by a third party. You acknowledge that such transfers may occur and that the transferee may decline honor commitments we made in this Privacy Policy.<br />
<br />
We are not responsible for the actions of third parties with whom you share personal or sensitive data, and we have no authority to manage or control third-party solicitations. If you no longer wish to receive correspondence, emails or other communications from third parties, you are responsible for contacting the third party directly.<br />
<br />
<br />
THIRD-PARTY WEBSITES<br />
<br />
The Application may contain links to third-party websites and applications of interest. Once you have used these links to leave the Application, any information you provide to these third parties is not covered by this Privacy Policy, and we cannot guarantee the safety and privacy of your information. Before visiting and providing any information to any third-party websites, you should inform yourself of the privacy policies and practices (if any) of the third party responsible for that website, and should take those steps necessary to, in your discretion, protect the privacy of your information. We are not responsible for the content or privacy and security practices and policies of any third parties, including other sites, services or applications that may be linked to or from the Application.<br />
<br />
SECURITY OF YOUR INFORMATION<br />
<br />
We use administrative, technical, and physical security measures to help protect your personal information. While we have taken reasonable steps to secure the personal information you provide to us, please be aware that despite our efforts, no security measures are perfect or impenetrable, and no method of data transmission can be guaranteed against any interception or other type of misuse. Any information disclosed online is vulnerable to interception and misuse by unauthorized parties. Therefore, we cannot guarantee complete security if you provide personal information.<br />
<br />
POLICY FOR CHILDREN<br />
<br />
We do not knowingly solicit information from or market to children under the age of 13. If you become aware of any data we have collected from children under age 13, please contact us using the contact information provided below.<br />
<br />
CALIFORNIA PRIVACY RIGHTS<br />
<br />
California Civil Code Section 1798.83, also known as the “Shine The Light” law, permits our users who are California residents to request and obtain from us, once a year and free of charge, information about categories of personal information (if any) we disclosed to third parties for direct marketing purposes and the names and addresses of all third parties with which we shared personal information in the immediately preceding calendar year. If you are a California resident and would like to make such a request, please submit your request in writing to us using the contact information provided below.<br />
<br />
If you are under 18 years of age, reside in California, and have a registered account with the Application, you have the right to request removal of unwanted data that you publicly post on the Application. To request removal of such data, please contact us using the contact information provided below, and include the email address associated with your account and a statement that you reside in California. We will make sure the data is not publicly displayed on the Application, but please be aware that the data may not be completely or comprehensively removed from our systems.</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=85SCSI2SD2020-11-29T23:57:35Z<p>Aperez: </p>
<hr />
<div><strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European and UK Customers, we have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 a nd V5.2 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="http://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=84SCSI2SD2020-11-29T23:56:55Z<p>Aperez: </p>
<hr />
<div><strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European Customers, we now have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 in the UK]<br />
<br />
Australian Customers, we have a new distributor of [https://recapamac.com.au/shop/ SCSI2SD V5.5 and V5.2], as of November, 2020.<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="http://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=83SCSI2SD2020-11-28T18:27:57Z<p>Aperez: </p>
<hr />
<div><strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European Customers, we now have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 in the UK]<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="http://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br> SCSI2SD V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=82SCSI2SD2020-11-28T18:27:14Z<p>Aperez: </p>
<hr />
<div><strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European Customers, we now have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 in the UK]<br />
<br />
SCSI2SD V6 [http://scsi2sd.com/v6/buy boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|200px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="http://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br>V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|200px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=81SCSI2SD2020-11-28T18:26:15Z<p>Aperez: </p>
<hr />
<div><strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European Customers, we now have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 in the UK]<br />
<br />
SCSI2SD V6 [https://store.inertialcomputing.com/SCSI2SD-v6-p/scsi2sd-v6-revf.htm boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|300px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="http://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br>V5.5<br />
! [[File:SCSI2SD-V6-Rev2020c.jpg|300px|thumb|left|SCSI2SD V6]]<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=File:SCSI2SD-V6-Rev2020c.jpg&diff=80File:SCSI2SD-V6-Rev2020c.jpg2020-11-28T18:24:58Z<p>Aperez: SCSI2SD V6 Rev 2020c</p>
<hr />
<div>== Summary ==<br />
SCSI2SD V6 Rev 2020c</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=79SCSI2SD2020-11-26T16:19:44Z<p>Aperez: </p>
<hr />
<div><strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European Customers, we now have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 in the UK]<br />
<br />
SCSI2SD V6 [https://store.inertialcomputing.com/SCSI2SD-v6-p/scsi2sd-v6-revf.htm boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|300px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="http://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br>V5.5<br />
! <img src="http://www.scsi2sd.com/images/SCSI2SD-V6-Rev2020c-resized.jpg" width="300"><br> V6<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD&diff=78SCSI2SD2020-11-26T01:45:06Z<p>Aperez: </p>
<hr />
<div><strong>24 November 2020</strong> - SCSI2SD V5.2 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.2 available for purchase today]. Assembled in Canada<br><br />
<br />
<strong>30 October 2020</strong> - SCSI2SD V5.5 is [https://store.inertialcomputing.com/ProductDetails.asp?ProductCode=SCSI2SD-V5.5 available for purchase today], with a translucent/frosted, injection-molded ABS enclosure<br><br />
<br />
European Customers, we now have a [https://amigakit.amiga.store/product_info.php?products_id=12701&currency=EUR distributor of SCSI2SD V5.5 in the UK]<br />
<br />
SCSI2SD V6 [https://store.inertialcomputing.com/SCSI2SD-v6-p/scsi2sd-v6-revf.htm boards in stock]<br />
<br />
{| class="wikitable" <br />
|-<br />
! style="font-family:Arial, Helvetica, sans-serif !important;;" | SCSI2SD model<br />
! <img src="https://www.scsi2sd.com/images/SCSI2SD-V5.1-halfres.jpg" width="300"><br>V5.1 (discontinued)<br />
! [[File:SCSI2SD-V5.2-Rev2020a.jpg|300px|thumb|left|SCSI2SD V5.2]]<br />
! <img src="http://www.scsi2sd.com/images/SCSI2SD-V5.5-small.jpg" width="300"><br>V5.5<br />
! <img src="http://www.scsi2sd.com/images/SCSI2SD-V6-Rev2020c-resized.jpg" width="300"><br> V6<br />
|-<br />
| SD card slot<br />
| colspan="2" | full size<br />
| microSD<br />
| full size<br />
|-<br />
| SD card interface<br />
| colspan="3" | Full-size, tested up to 256GB. Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)<br />
| <br />
|-<br />
| SCSI Interface<br />
| SCSI-2 Narrow 8-bit 50-pin IDC <br />connector,<br />Optional DB25 female socket<br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit <br />50 IDC pin connector<br /><br />Supports asynchronous transfers only.<br /><br />
| Male DB-25 socket<br /><br /><br />Supports asynchronous transfers only.<br /><br />
| SCSI-2 Narrow 8-bit 50 IDC pin connector<br />FAST10 (10MB/s) synchronous transfer.<br /><br />
|-<br />
| SCSI Termination<br />
| colspan="2" | Software controlled active termination, via scsi2sd-util<br />
| Active terminator, always on<br />
| <br />
|-<br />
| Dimensions<br />
| colspan="2" | 10cm x 9cm x 1.5cm<br />
| 7.5cm x 5.5cm x 1.8cm (External case)<br />
| 10cm x 9cm x 1.5cm<br />
|-<br />
| Performance<br />
| colspan="2" | Up to 2.6MB/s read, 2.3MB/s write<br /><br />(1.1MB/s on most older SCSI hosts)<br />
| Up to 1MB/sec<br />
| Up to 10MB/s<br />
|-<br />
| USB Interface<br />
| colspan="3" | Firmware updates and configuration<br />USB 2.0 micro-B<br />
| Firmware updates, configuration, and mass-storage<br />USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)<br />
|-<br />
| Power<br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br /><br /><br />
| style="vertical-align:middle;" | 5V via:<br />* standard 4-pin floppy-drive connector<br />* micro USB<br />* self-powered using the SCSI host termination power<br />* Regulated 5V via optional DC barrel jack.<br /><br />
| Self-powered using the SCSI host termination power,<br />or via USB. 2.35W maximum (500mA)<br /><br />To function without external power via USB, requires SCSI host that <br />supplies terminator power on pin 25 of the DB25 socket<br />
| 5V via standard 4-pin floppy-drive connector, USB,<br />or self-powered using the SCSI host termination power<br /><br /><br />
|-<br />
| Current Draw<br />
| colspan="4" style="text-align:center;" | 2.35W maximum (500mA)<br />
|}<br />
The latest SCSI2SD V5 firmware version 4.8.4 is now available for download at [http://scsi2sd.com/v5/files/v4.8.4/firmware http://scsi2sd.com/v5/files/v4.8.4/firmware]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD-V5.2&diff=77SCSI2SD-V5.22020-11-26T01:33:38Z<p>Aperez: </p>
<hr />
<div>SCSI2SD V5.2 is an evolution of the SCSI2SD V5.1 design, and is largely identical, with the notable exception of the removal of the DB25 connector area, and associated traces, which were found to cause problems in certain corner cases. We chose to remove it to increase compatibility.<br />
<br />
In the PCB space that was reclaimed by removing the DB25 connector area, we've replaced it with a presently-unused SPI interface pin headers. Future firmware versions will enable additional functionality.<br />
<br />
Other new features of V5.2 include:<br />
<br />
* Addition of an unpopulated connector area, P202, for a DC barrel jack, to be used in conjunction with a regulated 5 volt DC supply.<br />
<br />
* Addition of an unpopulated full-size USB-B connector area, which allows users to replace the micro USB socket with a full sized USB-B connector. Occasionally, we've had customers snap off their micro USB connectors, and this makes it difficult or impossible to re-configure the board afterwards, particularly if the USB traces on the PCB were damaged. Now, with V5.2, if this were to happen, a board can be saved/salvaged by soldering on a through-hole USB-B connector.<br />
<br />
[[File:SCSI2SD-V5.2-Rev2020a.jpg|400px|thumb|center]]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD-V5.2&diff=76SCSI2SD-V5.22020-11-26T01:30:43Z<p>Aperez: </p>
<hr />
<div>SCSI2SD V5.2 is an evolution of the SCSI2SD V5.1 design, and is largely identical, with the notable exception of the removal of the DB25 connector area, and associated traces, which were found to cause problems in certain corner cases. We chose to remove it to increase compatibility.<br />
<br />
In the PCB space that was reclaimed by removing the DB25 connector area, we've replaced it with a presently-unused SPI interface pin headers. (these pins could be used for other types of general purpose I/O, as well) In the future. <br />
<br />
Other new features of V5.2 include:<br />
<br />
* Addition of an unpopulated connector area, P202, for a DC barrel jack, to be used in conjunction with either a regulated 5 volt DC supply. This connector can also be used to feed the board 5 Volts DC from other sources, when they're available.<br />
<br />
* Addition of an unpopulated full-size USB-B connector area, which allows users to replace the micro USB socket with a full sized USB-B connector. Occasionally, we've had customers snap off their micro USB connectors, and this makes it difficult or impossible to re-configure the board afterwards, particularly if the USB traces on the PCB were damaged. Now, with V5.2, if this were to happen, a board can be saved/salvaged by soldering on a through-hole USB-B connector.<br />
<br />
[[File:SCSI2SD-V5.2-Rev2020a.jpg|400px|thumb|center]]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD-V5.2&diff=75SCSI2SD-V5.22020-11-26T01:30:28Z<p>Aperez: </p>
<hr />
<div>SCSI2SD V5.2 is an evolution of the SCSI2SD V5.1 design, and is largely identical, with the notable exception of the removal of the DB25 connector area, and associated traces, which were found to cause problems in certain corner cases. We chose to remove it to increase compatibility.<br />
<br />
In the PCB space that was reclaimed by removing the DB25 connector area, we've replaced it with a presently-unused SPI interface pin headers. (these pins could be used for other types of general purpose I/O, as well) In the future. <br />
<br />
Other new features of V5.2 include:<br />
<br />
* Addition of an unpopulated connector area, P202, for a DC barrel jack, to be used in conjunction with either a regulated 5 volt DC supply. This connector can also be used to feed the board 5 Volts DC from other sources, when they're available.<br />
<br />
* Addition of an unpopulated full-size USB-B connector area, which allows users to replace the micro USB socket with a full sized USB-B connector. Occasionally, we've had customers snap off their micro USB connectors, and this makes it difficult or impossible to re-configure the board afterwards, particularly if the USB traces on the PCB were damaged. Now, with V5.2, if this were to happen, a board can be saved/salvaged by soldering on a through-hole USB-B connector.<br />
<br />
[[File:SCSI2SD-V5.2-Rev2020a.jpg|400px|thumb|left|SCSI2SD V5.2]]</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD-V5.2&diff=74SCSI2SD-V5.22020-11-26T01:25:08Z<p>Aperez: </p>
<hr />
<div>[[File:SCSI2SD-V5.2-Rev2020a.jpg|400px|thumb|left|SCSI2SD V5.2]]<br />
SCSI2SD V5.2 is an evolution of the SCSI2SD V5.1 design, and is largely identical, with the notable exception of the removal of the DB25 connector area, and associated traces, which were found to cause problems in certain corner cases. We chose to remove it to increase compatibility.<br />
<br />
In the PCB space that was reclaimed by removing the DB25 connector area, we've replaced it with a presently-unused SPI interface pin headers. (these pins could be used for other types of general purpose I/O, as well) In the future. <br />
<br />
Other new features of V5.2 include:<br />
<br />
* Addition of an unpopulated connector area, P202, for a DC barrel jack, to be used in conjunction with either a regulated 5 volt DC supply. This connector can also be used to feed the board 5 Volts DC from other sources, when they're available.<br />
<br />
* Addition of an unpopulated full-size USB-B connector area, which allows users to replace the micro USB socket with a full sized USB-B connector. Occasionally, we've had customers snap off their micro USB connectors, and this makes it difficult or impossible to re-configure the board afterwards, particularly if the USB traces on the PCB were damaged. Now, with V5.2, if this were to happen, a board can be saved/salvaged by soldering on a through-hole USB-B connector.</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD-V5.2&diff=73SCSI2SD-V5.22020-11-26T01:24:37Z<p>Aperez: </p>
<hr />
<div>[[File:SCSI2SD-V5.2-Rev2020a.jpg|400px|thumb|left|SCSI2SD V5.2]]<br />
SCSI2SD V5.2 is an evolution of the SCSI2SD V5.1 design, and is largely identical, with the notable exception of the removal of the DB25 connector area, and associated traces, which were found to cause problems in certain corner cases. We chose to remove it to increase compatibility.<br />
<br />
In the PCB space that was reclaimed by removing the DB25 connector area, we've replaced it with a presently-unused SPI interface pin headers. (these pins could be used for other types of general purpose I/O, as well) In the future. <br />
<br />
Other new features of V5.2 include:<br />
<br />
* Addition of an unpopulated connector area, P202, for a DC barrel jack, to be used in conjunction with either a regulated 5 volt DC supply. This connector can also be used to feed the board 5 Volts DC from other sources, when they're available.<br />
<br />
* Addition of an unpopulated full-size USB-B connector area, which allows users to replace the micro USB socket with a full sized USB-B connector. Occasionally, we've had customers snap off their micro USB connectors, and this makes it difficult or impossible to re-configure the board afterwards, particularly if the USB traces on the PCB were damaged. Now, with V5.2, if this were to happen, a board can be saved/salvaged by a mere mortal, by soldering on a through-hole USB-B connector.</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD-V5.2&diff=72SCSI2SD-V5.22020-11-26T01:24:20Z<p>Aperez: </p>
<hr />
<div>[[File:SCSI2SD-V5.2-Rev2020a.jpg|400px|thumb|left|SCSI2SD V5.2]]<br />
<br><br />
SCSI2SD V5.2 is an evolution of the SCSI2SD V5.1 design, and is largely identical, with the notable exception of the removal of the DB25 connector area, and associated traces, which were found to cause problems in certain corner cases. We chose to remove it to increase compatibility.<br />
<br />
In the PCB space that was reclaimed by removing the DB25 connector area, we've replaced it with a presently-unused SPI interface pin headers. (these pins could be used for other types of general purpose I/O, as well) In the future. <br />
<br />
Other new features of V5.2 include:<br />
<br />
* Addition of an unpopulated connector area, P202, for a DC barrel jack, to be used in conjunction with either a regulated 5 volt DC supply. This connector can also be used to feed the board 5 Volts DC from other sources, when they're available.<br />
<br />
* Addition of an unpopulated full-size USB-B connector area, which allows users to replace the micro USB socket with a full sized USB-B connector. Occasionally, we've had customers snap off their micro USB connectors, and this makes it difficult or impossible to re-configure the board afterwards, particularly if the USB traces on the PCB were damaged. Now, with V5.2, if this were to happen, a board can be saved/salvaged by a mere mortal, by soldering on a through-hole USB-B connector.</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD-V5.2&diff=71SCSI2SD-V5.22020-11-26T01:24:03Z<p>Aperez: </p>
<hr />
<div>[[File:SCSI2SD-V5.2-Rev2020a.jpg|400px|thumb|left|SCSI2SD V5.2]]<br />
<br />
SCSI2SD V5.2 is an evolution of the SCSI2SD V5.1 design, and is largely identical, with the notable exception of the removal of the DB25 connector area, and associated traces, which were found to cause problems in certain corner cases. We chose to remove it to increase compatibility.<br />
<br />
In the PCB space that was reclaimed by removing the DB25 connector area, we've replaced it with a presently-unused SPI interface pin headers. (these pins could be used for other types of general purpose I/O, as well) In the future. <br />
<br />
Other new features of V5.2 include:<br />
<br />
* Addition of an unpopulated connector area, P202, for a DC barrel jack, to be used in conjunction with either a regulated 5 volt DC supply. This connector can also be used to feed the board 5 Volts DC from other sources, when they're available.<br />
<br />
* Addition of an unpopulated full-size USB-B connector area, which allows users to replace the micro USB socket with a full sized USB-B connector. Occasionally, we've had customers snap off their micro USB connectors, and this makes it difficult or impossible to re-configure the board afterwards, particularly if the USB traces on the PCB were damaged. Now, with V5.2, if this were to happen, a board can be saved/salvaged by a mere mortal, by soldering on a through-hole USB-B connector.</div>Aperezhttps://www.scsi2sd.com/index.php?title=SCSI2SD-V5.2&diff=70SCSI2SD-V5.22020-11-26T01:23:52Z<p>Aperez: </p>
<hr />
<div>[[File:SCSI2SD-V5.2-Rev2020a.jpg|400px|thumb|left|SCSI2SD V5.2]]<br />
SCSI2SD V5.2 is an evolution of the SCSI2SD V5.1 design, and is largely identical, with the notable exception of the removal of the DB25 connector area, and associated traces, which were found to cause problems in certain corner cases. We chose to remove it to increase compatibility.<br />
<br />
In the PCB space that was reclaimed by removing the DB25 connector area, we've replaced it with a presently-unused SPI interface pin headers. (these pins could be used for other types of general purpose I/O, as well) In the future. <br />
<br />
Other new features of V5.2 include:<br />
<br />
* Addition of an unpopulated connector area, P202, for a DC barrel jack, to be used in conjunction with either a regulated 5 volt DC supply. This connector can also be used to feed the board 5 Volts DC from other sources, when they're available.<br />
<br />
* Addition of an unpopulated full-size USB-B connector area, which allows users to replace the micro USB socket with a full sized USB-B connector. Occasionally, we've had customers snap off their micro USB connectors, and this makes it difficult or impossible to re-configure the board afterwards, particularly if the USB traces on the PCB were damaged. Now, with V5.2, if this were to happen, a board can be saved/salvaged by a mere mortal, by soldering on a through-hole USB-B connector.</div>Aperez